|
|
We suggest the following to make your installation easier:
- To make outside installations easier, pick a dry day with low to moderate wind.
- Items you will need for install: squeegee, masking tape and a tape measure.
- Vinyl signs, letters and graphics should never be installed when the receiving surface temperature is less than 50 degrees Fahrenheit or greater than 85 degrees Fahrenheit.
- The application surface should be free of dirt , wax and all contaminants. (See I. )
- Prepare some soapy water in a spray bottle (Mix 3 - 4 drops of liquid dish detergent per quart)
- Clean your application surface thoroughly!
Newly painted surfaces must cure 48-72 hours in advance of graphic application.
With the backing still on, tack pieces of tape on each upper corner of your graphic where you want to install it. This holds it in place for you. Since the backing is still on your graphic, you can always move it around.
- Use a tape measure to make sure it is level.
|
